diff --git a/board/mx1ads/mx1ads.c b/board/mx1ads/mx1ads.c
new file mode 100644
index 0000000..567f88a
--- /dev/null
+++ b/board/mx1ads/mx1ads.c
@@ -0,0 +1,183 @@
+/*
+ * board/mx1ads/mx1ads.c
+ * 
+ * (c) Copyright 2004
+ * Techware Information Technology, Inc.
+ * http://www.techware.com.tw/
+ *
+ * Ming-Len Wu <minglen_wu@techware.com.tw>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+
+#include <common.h>
+#include <mc9328.h>
+
+/* ------------------------------------------------------------------------- */
+
+#define FCLK_SPEED 1
+
+#if FCLK_SPEED==0		/* Fout = 203MHz, Fin = 12MHz for Audio */
+#define M_MDIV	0xC3
+#define M_PDIV	0x4
+#define M_SDIV	0x1
+#elif FCLK_SPEED==1		/* Fout = 202.8MHz */
+#define M_MDIV	0xA1
+#define M_PDIV	0x3
+#define M_SDIV	0x1
+#endif
+
+#define USB_CLOCK 1
+
+#if USB_CLOCK==0
+#define U_M_MDIV	0xA1
+#define U_M_PDIV	0x3
+#define U_M_SDIV	0x1
+#elif USB_CLOCK==1
+#define U_M_MDIV	0x48
+#define U_M_PDIV	0x3
+#define U_M_SDIV	0x2
+#endif
+
+#if 0
+
+static inline void delay (unsigned long loops) {
+	__asm__ volatile ("1:\n"
+	  "subs %0, %1, #1\n"
+	  "bne 1b":"=r" (loops):"0" (loops));
+}
+
+#endif 
+
+/*
+ * Miscellaneous platform dependent initialisations
+ */
+
+
+void SetAsynchMode(void) {
+	__asm__ (
+		"mrc p15,0,r0,c1,c0,0 \n"
+		"mov r2, #0xC0000000 \n"
+		"orr r0,r2,r0 \n"
+		"mcr p15,0,r0,c1,c0,0 \n"
+	);
+}
+                                                
+static u32 mc9328sid;
+
+int board_init (void) {
+
+	DECLARE_GLOBAL_DATA_PTR;
+
+	volatile unsigned int  tmp;
+
+	mc9328sid	= MX1_SIDR;
+
+	MX1_GPCR 	= 0x000003AB;		/* I/O pad driving strength 	*/
+	
+/*	MX1_CS1U 	= 0x00000A00;	*/	/* SRAM initialization 		*/
+/*	MX1_CS1L 	= 0x11110601; 	*/
+                        
+
+	MX1_MPCTL0 	= 0x04632410;	/* setting for 150 MHz MCU PLL CLK	*/
+
+/*	MX1_MPCTL0 	= 0x003f1437;	*//* setting for 192 MHz MCU PLL CLK	*/
+
+
+
+/* set FCLK divider 1 (i.e. FCLK to MCU PLL CLK) and
+ * BCLK divider to 2 (i.e. BCLK to 48 MHz)
+ */
+	MX1_CSCR 	= 0xAF000403;
+
+	MX1_CSCR 	|= 0x00200000;   	/* Trigger the restart bit(bit 21)	*/
+	MX1_CSCR 	&= 0xFFFF7FFF;		/* Program PRESC bit(bit 15) to 0 to divide-by-1 */
+
+/* setup cs4 for cs8900 ethernet */
+	
+	MX1_CS4U	= 0x00000F00;	/* Initialize CS4 for CS8900 ethernet 	*/
+	MX1_CS4L	= 0x00001501;
+    
+	MX1_GIUS_A	&= 0xFF3FFFFF;
+	MX1_GPR_A	&= 0xFF3FFFFF;
+        
+	tmp = *(unsigned int *)(0x1500000C);
+	tmp = *(unsigned int *)(0x1500000C);
+
+/* setup timer 1 as system timer  	*/
+
+	MX1_TPRER1	= 0x1f;		/* divide by 32 		*/
+	MX1_TCTL1	= 0x19;		/* clock in from 32k Osc.	*/
+
+
+	SetAsynchMode();
+
+	gd->bd->bi_arch_number = 160;	/* Arch number of MX1ADS Board 		*/
+
+	gd->bd->bi_boot_params = 0x08000100;	/* adress of boot parameters	*/
+
+	icache_enable();
+	dcache_enable();
+
+/* set PERCLKs				*/
+	MX1_PCDR = 0x00000055;     	/* set PERCLKS				*/
+	
+/* PERCLK3 is only used by SSI so the SSI driver can set it any value it likes 
+ * PERCLK1 and PERCLK2 are shared so DO NOT change it in any other place       
+ * all sources selected as normal interrupt
+ */
+	MX1_INTTYPEH = 0;
+	MX1_INTTYPEL = 0;
+
+	return 0;
+}
+
+
+int board_late_init(void) {
+
+	setenv("stdout", "serial");
+	setenv("stderr", "serial");
+
+	switch	(mc9328sid) {
+		case 0x0005901d :
+			printf ("MX1ADS board with MC9328 MX1 (0L44N), Silicon ID 0x%08x \n\n",mc9328sid); 
+			break;
+		case 0x04d4c01d :
+			printf ("MX1ADS board with MC9328 MXL (1L45N), Silicon ID 0x%08x \n\n",mc9328sid); 
+			break;
+		case 0x00d4c01d :
+			printf ("MX1ADS board with MC9328 MXL (2L45N), Silicon ID 0x%08x \n\n",mc9328sid); 
+			break;
+
+		default :
+			printf ("MX1ADS board with UNKNOWN MC9328 cpu, Silicon ID 0x%08x \n",mc9328sid); 
+			break;
+		
+	}
+	
+	return 0;
+} 
+                        
+
+int dram_init (void) {
+	DECLARE_GLOBAL_DATA_PTR;
+
+	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+	gd->bd->bi_dram[0].size  = PHYS_SDRAM_1_SIZE;
+
+	return 0;
+}